Products

1
Yes
None
1
25
/catalog/
Thumbnail

Categories:

Sub-Categories:

Scales
Cardinal Guardian Hydraulic - Steel Deck
   

Cardinal’s American-made Guardian Hydraulic Truck Scales are ideal for the solid waste, aggregate, chemical, grain, and construction industries because they offer a high level of protection against many of the conditions that can adversely affect truck scale installations. Water, lightning, power surges, explosive areas, corrosion, welding, shock loading, extreme temperature fluctuations and even rodents can cause scale problems, all at a cost to the owner. Cardinal builds their scales rock solid steel deck plate to stand up to heavy loads. Every Guardian is 100% factory assembled and tested before shipping. NTEP legal-for-trade.

  • Scale Width:  11 ft
  • Concentrated Load Capacity:  40 tons
  • Load Cell:  SST Hydraulic
  • V-min:   3.8, 5.7 lb
  • Accuracy:  Class IIIL 10,000 divisions multiple cells
  • Rated Capacity:  3,000 PSIG
  • Working Capacity:   1,800 PSIG
  • Pressure Transducer Construction:    aluminum
  • Output: 1 mV/V
  • Output Resistance:  350 ohms +/- 1 ohm
  • Load Cell Construction:  Stainless Steel
  • Paint:  Baked-on epoxyde cross-linked polyester anti-corrosion tan powder paint


PRODUCT OPTIONS
ModelSizeCapacityType
H4020-EPR20' x 11'40 TonSteel Deck
H7040-EPR40' x 11'70 TonSteel Deck
H7047-EPR47' x 11'70 TonSteel Deck
H8050-EPR50' x 11'80 TonSteel Deck
H11060-EPR60' x 11'110 TonSteel Deck
H13570-EPR70' x 11'135 TonSteel Deck
H13575-EPR75' x 11'135 TonSteel Deck
H13580-EPR80' x 11'135 TonSteel Deck
H13590-EPR90' x 11'135 TonSteel Deck
H135100-EPR100' x 11'135 TonSteel Deck
H135117-EPR117' x 11'135 TonSteel Deck
H4010-EPR1010' x 10'40 TonSteel Deck
H4012-EPR1012' x 10'40 TonSteel Deck
H4015-EPR1015' x 10'40 TonSteel Deck
Cardinal Multi-Platform Truck Scales
   

Cardinal’s multiple platform truck scales weigh multiple axles plus total weight simultaneously, which is commonly needed for highway weigh station law enforcement purposes. These multiple platform scales are not restricted by pre-configured size specifications, although standard models are listed under Models/Pricing, and Cardinal can custom-build any of their truck scales to meet specific length requirements while maintaining a very competitive price. Each platform can function individually as its own scale. Available in steel or concrete deck with hydraulic or electronic load cells, Cardinal’s multiple platform scales are NTEP legal-for-trade.

  • Platform Sizes:   Vary according to model. See Models/Pricing.
  • Concentrated Load Capacity:   45 tons
  • Load Cell:   DB or SCA Electronic or SST Hydraulic Cells
  • NTEP Approval:  97-133A1
  • Load Cell Construction:   Stainless Steel


PRODUCT OPTIONS
ModelSizeCapacityType
122040-EPR-MP4512'/20'/40' x 11'135 TonSteel Deck
151550-EPR-MP4515'/15'/50' x 11'135 TonSteel Deck
202040-EPR-MP4520'/20'/40' x 11'135 TonSteel Deck
H122040-EPR-MP4012'/20'/40' x 11'135 TonHydraulic - Steel Deck
H151550-EPR-MP4015'/15'/50' x 11'135 TonHydraulic - Steel Deck
H202040-EPR-MP4020'/20'/40' x 11'135 TonHydraulic - Steel Deck
122040-EPRC-MP4512'/20'/40' x 11'135 TonHydraulic - Concrete Deck
151550-EPRC-MP4515'/15'/50' x 11'135 TonHydraulic - Concrete Deck
202040-EPRC-MP4520'/20'/40' x 11'135 TonHydraulic - Concrete Deck
Intercomp LP600 Wheel Load Scales
   

This scale is designed to maximize legal payloads with concern for violations and reduction of maintenance due to overload stress on equipment.  This durable, low-profile scale is just 1.5\\\" (38mm) high, while the all aluminum, fully electronic, self-contained wheel load scale is capable of weighing loads up to 30,000lbs (15,000kg) with an accuracy of ±1%.

Fully integrated RFX™ Wireless Weighing Technology, using no antennas makes it possible to sequentially couple and number LP600™ scales in the series for the purpose of obtaining a total vehicle weight through the total button or linking the scales to a computer, display, or Intercomp’s complete line of weighing indicators.  For customers whose local regulations prevent the use of any wireless radio communication, radios can be disabled or you can select from hardwired alternatives.

  • 5,000 lb (2,500 kg) to 30,000 lb (15,000 kg) Pad Capacities
  • Accuracy of ±1% of Reading
  • Large, Easy-to-Read, LCD Display
  • NTEP/OIML Certified Models and Factory Mutual (FM) for Hazardous Environments Available
  • Standard AA Rechargeable Batteries Last up to 300 Hours in Scales
PRODUCT OPTIONS
ModelSizeCapacityType
Intercomp LP600-15T Wheel Load Scales
   

Providing a weighing capacity of 30 tons per axle, the LP600-15T™ system is designed for weighing heavy vehicles on unimproved surfaces.  The system weighs axle-by-axle in static mode using two scales, while extension levelers keep axle groups on a level plane providing ±1% accuracy.  The scales and CPU communicate via Intercomp’s RFX™ Wireless Weighing Technology and are powered by commercially available batteries for up to 200 hours.  

Systems consist of two 15 ton capacity scales, two pairs of levelers per scale and your choice of below Intercomp devices.

  • Capacity of 30 Tons Per Axle
  • Static Accuracy Meets NTEP/OIML Requirements
  • Wireless & Wired Indicator Options
  • Low Platform Height of Just 1.7\\\" (43mm)
  • Ramps/Levelers Roll Up for Easy Transport
  • Scales Operate on AA Size Alkaline Batteries up to 200 Hours
PRODUCT OPTIONS
ModelSizeCapacityType
Intercomp PT300 Wheel Load Scales
   

PT300™ scales have been setting the bar for portable, self-contained, compact wheel load scales for decades. Used to maximize legal payloads and reduce maintenance due to overload stress on equipment, these all aluminum, fully-equipped electronic scales are capable of weighing up to 20,000lbs (10,000kgs) with an accuracy of ± 1%. They also feature RFX™ Wireless Weighing communication between scales and remote indicators, and all PT300™ scales come standard with solar charging panels that virtually eliminate the need to manually recharge batteries between uses.
 
PT300™ scales can also weigh dual-tire configurations by placing the scales under the outside tires, with the inside tires suspended in the air.
 
NTEP Certified Models Available

Features:

  • 5,000 lb (2,500 kg) to 20,000 lb (10,000 kg) Pad Capacities
  • Accuracy of ±1% of Reading
  • Large, Easy-to-Read, LCD Display
  • NTEP Certified Models Available
  • Solar Power Provides up to One Year of Battery Life with Daytime, Outdoor Use


PRODUCT OPTIONS
ModelSizeCapacityType
181004-RFX12" x 20"20,000 lbs x 10 lbsWireless
181005-RFX12" x 20"10,000 lbs x 5 lbsWireless
181006-RFX12" x 20"5,000 lbs x 5 lbsWireless
181007-RFX12" x 20"20,000 lbs x 20 lbsWireless
181008-RFX12" x 20"20,000 lbs 50 lbsWireless
Intercomp PT300 Double Wide Wheel Load Scales
   

PT300DW™ scales feature Fully Integrated RFX™ Wireless Weighing Technology and are designed to maximize legal payloads with concern for violations and reduction of maintenance due to overload stress on equipment but is designed to accommodate oversized tires, ideal for use on unimproved surfaces to ensure wheels don’t touch the ground.   

Fully integrated RFX™ Wireless Weighing Technology uses no antennas and makes it possible to sequentially couple and number PT300DW™ scales in the series for the purpose of obtaining a total vehicle weight through the total button or linking the scales to a computer, display, or Intercomp’s complete line of weighing indicators.  For customers whose local regulations prevent the use of any wireless radio communication, radios can be disabled or you can select from hardwired alternatives. 

The scales are fully battery operated and only require infrequent recharging through 12V, 110V, or 220V power sources.  Standard AA Batteries last up to 300 Hours in the Scales.


 

  • 5,000 lb (2,500 kg) to 40,000 lb (20,000 kg) Pad Capacities
  • Accuracy of ±1% of Reading
  • Large, Easy-to-Read, LCD Display
  • Standard AA Rechargeable Batteries Last up to 300 Hours in Scales
PRODUCT OPTIONS
ModelSizeCapacityType
Cardinal Yukon Off-Road Heavy Duty
   

Designed and built specifically for the mining industry and off-road vehicle weighing, the American-made YUKON truck scale features an amazingly-high 70-ton concentrated load capacity with extra-thick, heavy-duty steel deck plate.

THE SCALE FOR MOVING MOUNTAINS
Featuring extra-wide concrete or steel decks and employing Cardinal’s compression-type, environmentally-sealed stainless steel load cells, these scales boast a massive 150-ton capacity and are available with impervious hydraulic or electronic load cell types with a variety of lengths to choose from. NTEP legal-for-trade certified.

  • Scale Capacity:   150 tons
  • Concenrated Load Capacity:    70 tons
  • Platform Width:  12, 14 or 16 ft
  • Load Cell:   SCA (Electronic) or SST (Hydraulic) models
  • Load Cell Construction:   Stainless Steel
  • NTEP Approval:  09-061
  • Paint:   Baked-on epoxyde cross-linked polyester anti-corrosion tan powder paint
PRODUCT OPTIONS
ModelSizeCapacityType
150(60,70,80)-CY1260,70, or 80' x 12' 150 TonElectronic -Steel Deck
150(60,70,80)-CY1460,70, or 80' x 14' 150 TonElectronic -Steel Deck
150(60,70,80)-CY1660,70, or 80' x 16' 150 TonElectronic -Steel Deck
150(60,70,80)-CY1260,70, or 80' x 12' 150 TonElectronic -Concrete Deck
150(60,70,80)-CY1460,70, or 80' x 14' 150 TonElectronic -Concrete Deck
H150(60,70,80)-CY1260,70, or 80' x 12' 150 TonHydraulic -Steel Deck
H150(60,70,80)-CY1460,70, or 80' x 14' 150 TonHydraulic -Steel Deck
H150(60,70,80)-CY1660,70, or 80' x 16' 150 TonHydraulic -Steel Deck
H150(60,70,80)-CY12-C60,70, or 80' x 12' 150 TonElectronic -Concrete Deck
H150(60,70,80)-CY14-C60,70, or 80' x 14' 150 TonElectronic -Concrete Deck
Cardinal Weigh-In-Motion
   

Weigh-in-Motion Commercial Vehicle Weight Enforcement packages can include a multi-platform static vehicle scale, a high-speed QWIM series in-motion vehicle presort scale, traffic control system including lane direction lights and loop sensors with automatic and manual operating modes, a remote scoreboard display to show the driver his vehicle’s gross weight and a PC with special application software to integrate the whole system. The QWIM series in-motion vehicle scale is used to identify over weight vehicles as they enter the station and direct only those that exceed weight preset limits or are randomly selected to the static scale. The others are directed to return to the main roadway.

VWS1-1 Cardinal Single Lane Virtual Weigh Station With QWIM-1 In-motion Scale             Cardinal’s VWS1-1 Virtual Weigh Station is the answer to your commercial weight enforcement concerns. The VWS1-1, using Cardinal’s QWIM-1 High-Speed Quartz-Based In-Motion Vehicle Scale, allows you to monitor traffic and identify those vehicles that exceed weight limits. The VWS1-1 captures a color image (black and white during nighttime hours) of each passing vehicle along with its axle weights, axle spacing and vehicle speed. This information plus the vehicle’s classification, site identification, time and date and any status information is transmitted wirelessly across the Internet to a downstream patrol car or to any other authorized recipient. Armed with this information, the officer can intercept the offending vehicle. This same system can also be used to study traffic patterns for manpower planning and traffic flow studies. A variety of options are available to enable this system to fit your specific requirements. VWS1-2 Cardinal Single Lane Virtual Weigh Station With QWIM-2 In-motion Scale             Cardinal’s VWS1-2 Virtual Weigh Station is the answer to your commercial weight enforcement concerns. The VWS1-2, using Cardinal’s QWIM-2 High-Speed Quartz-Based In-Motion Vehicle Scale, allows you to monitor traffic and identify those vehicles that exceed weight limits. The Model QWIM-2 uses twice the quartz sensors as the QWIM-1 providing improved accuracy and sensor redundancy. The VWS1-2 captures a color image (black and white during nighttime hours) of each passing vehicle along with its axle weights, axle spacing and vehicle speed. This information plus the vehicle’s classification, site identification, time and date and any status information is transmitted wirelessly across the Internet to a downstream patrol car or to any other authorized recipient. Armed with this information, the officer can intercept the offending vehicle. This same system can also be used to study traffic patterns for manpower planning and traffic flow studies. A variety of options are available to enable this system to fit your specific requirements. VWS2-1 Cardinal Dual Lane Virtual Weigh Station With QWIM-1 In-motion Scales              Cardinal’s VWS2-1 Virtual Weigh Station is the answer to your commercial weight enforcement concerns. The VWS2-1, uses two Cardinal’s QWIM-1 High-Speed Quartz-Based In-Motion Vehicle Scales to monitor traffic in two different lanes and to identify those vehicles that exceed weight limits. The VWS2-1 captures a color image (black and white during nighttime hours) of each passing vehicle along with its lane number, axle weights, axle spacing and vehicle speed. This information plus the vehicle’s classification, site identification, time and date and any status information is transmitted wirelessly across the Internet to a downstream patrol car or to any other authorized recipient. Armed with this information, the officer can intercept the offending vehicle. This same system can also be used to study traffic patterns for manpower planning and traffic flow studies. A variety of options are available to enable this system to fit your specific requirements. VWS2-2 Cardinal Dual Lane Virtual Weigh Station With QWIM-2 In-motion Scales              Cardinal’s VWS2-2 Virtual Weigh Station is the answer to your commercial weight enforcement concerns. The VWS2-2, uses two Cardinal’s QWIM-2 High-Speed Quartz-Based In-Motion Vehicle Scales to monitor traffic in two different lanes and to identify those vehicles that exceed weight limits. The QWIM-2 In-Motion Vehicle Scale uses twice the number of quartz sensors as the QWIM-1 model thus improving its accuracy and providing a level of sensor redundancy. The VWS2-2 captures a color image (black and white during nighttime hours) of each passing vehicle along with its lane number, axle weights, axle spacing and vehicle speed. This information plus the vehicle’s classification, site identification, time and date and any status information is transmitted wirelessly across the Internet to a downstream patrol car or to any other authorized recipient. Armed with this information, the officer can intercept the offending vehicle. This same system can also be used to study traffic patterns for manpower planning and traffic flow studies. A variety of options are available to enable this system to fit your specific requirements. QWIM-1 Cardinal High-speed Quartz In-motion Vehicle Scale      Cardinal’s QWIM-1 High-Speed Quartz In-Motion Vehicle Scale utilizes two 1.5 m long Kistler LINEAS© quartz sensors embedded in the pavement to accurately measure the axle weights of passing vehicles. Using the sensor signals, this precision scale is able to measure the axle spacing and vehicle speed. The scale produces a vehicle weight record that includes the vehicle axle weights, gross weight, speed, axle spacing, vehicle classification, time and date and vehicle record number. When properly installed in pavement meeting basic requirements, the QWIM-1 will meet or exceed performance requirements for a Type 3 In-Motion Scale as defined in ASTM E1318-09. This scale is perfect for weighing vehicles travelling at speeds up to 80 mph. The flush mounted sensors offer no obstruction to passing snow plows and are stable over temperature. The scale can be installed in one or more lanes, normally in one day with only an 8-hour lane closure. QWIM-2 Cardinal High-speed Quartz In-motion Vehicle Scale      Cardinal’s QWIM-2 High-Speed Quartz In-Motion Vehicle Scale utilizes four 1.5 m long Kistler LINEAS© quartz sensors embedded in the pavement to accurately measure the axle weights of passing vehicles. This scale model uses two more sensors than the QWIM-1 which provides improved accuracy and sensor redundancy. Using the sensor signals, this precision scale is able to measure the axle spacing and vehicle speed. The scale produces a vehicle weight record that includes the vehicle axle weights, gross weight, speed, axle spacing, vehicle classification, time and date and vehicle record number. When properly installed in pavement meeting basic requirements, the QWIM-2 will meet or exceed performance requirements for a Type 3 In-Motion Scale as defined in ASTM E1318-09. This scale is perfect for weighing vehicles travelling at speeds up to 80 mph. The flush mounted sensors offer no obstruction to passing snow plows and are stable over temperature. The scale can be installed in one or more lanes, normally in one day with only an 8-hour lane closure. SWIM-1 Cardinal Slow-speed Load Cell In-motion Vehicle Scale  The Cardinal SWIM-1 consists of a welded steel weighbridge supported by four 50,000 pound capacity stainless steel compression strain gauge load cells and is used to provide accurate axle weights at slow speeds up to 10 mph. The Cardinal Model 825 weight indicator measures each axle weight as the vehicle crosses the platform then displays each axle weight and the gross vehicle weight. If desired, the scale can be used in a static mode for increased accuracy. Equipped with optional axle sensors, the scale can also measure vehicle speed and axle spacing to determine classification. This scale model is commonly used in the dynamic mode to identify over weight vehicles the used in the static mode for enforcement weighing. The Cardinal SCA series load cells used in this scale have been used successfully for over 25 years in full-length Cardinal truck scales and the combined 200,000 pound capacity of the load cells ensure that it’s up to the task of weighing any over-the-road vehicle. PWIM-1 Cardinal High-speed Piezo-based In-motion Vehicle Scale            The Cardinal PWIM-1 is a single lane in-motion scale using two full-length piezoelectric WIM-grade axle sensors. This scale uses the same CVM Series Cardinal In-Motion Scale used in our higher performance QWIM series of in-motion scale. Included with the PWIM series scale is a pavement temperature sensor to compensate for the changes in output of the piezoelectric sensors with temperature. This scale provides axle weight, gross weight, axle spacing, speed, vehicle number and time and date for each passing vehicle. The accuracy of this scale is less than that of the QWIM series providing a typical error of +/- 20% on a single axle. Axle group weights and gross weight errors are better. CWSPS Cardinal Weigh Station Package For Commercial Vehicle Enforcement     The CWSPS package includes both a multi-platform static vehicle scale, a high-speed QWIM series in-motion vehicle presort scale, traffic control system including lane direction lights and loop sensors with automatic and manual operating modes, a remote scoreboard display to show the driver his vehicle’s gross weight and a computer with special application software to integrate the whole system. While you have your choice of static scales, we highly recommend the concrete decked, multi-platform Guardian hydraulic vehicle scale. This heavy duty scale is scale of choice for enforcement weighing because of its fast operating speed, complete immunity to lightning and water damage, lifetime load cell warranty and a wide choice of weight indicating instruments and optional peripherals. The QWIM series in-motion vehicle scale is used to identify over weight vehicles as they enter the station and direct only those that exceed weight preset limits or are randomly selected to the static scale. The others are directed to return to the main roadway. A PLC-based traffic control system ensures accurate tracking of vehicles and provides both automatic and manual operating modes. A PC is included to display both weights from the static and in-motion scale and to administer a database of vehicle records and print associated reports. A wide variety of optional peripherals are available to meet most any requirement.  
PRODUCT OPTIONS
Model Size Capacity Type
Cardinal CWL-40 Axle Scales
   

Cardinal’s CWL-40 axle load scales are constructed of heavy-duty cast aluminum for high strength-to-weight ratio. Weighing only 57 pounds (26 kg) per 28.5 x 17.5-inch (72 x 45 cm) platform and featuring integral carrying handles, the CWL-40 axle pads are light enough for easy transport from location to location. The interlocking rubber ramps easily snap in place once you’re ready to weigh. The CWL-40KIT contains two CWL-40 axle pads with 20-ton capacity, rubber ramps, and necessary cables, plus Cardinal’s 190A weight indicator with axle weighing software and P150 thermal ticket printer. Both the 190A indicator and P150 printer may be powered by rechargeable lithium ion batteries (optional – 190A / standard – P150). The 190A indicator features two RS232 serial ports (to connect with a printer and remote display) and the one-inch-high backlit LCD is visible in direct sunlight and at night.

  • Capacity:  20,000 lb (9,000 kg) per platform or 40,000 lb (18,000 kg) for single axle
  • Division Size:  20 lb
  • Safe Overload: 150% of capacity
  • Output per Platform:  1.75 mV/V
  • Number of Load Cells:  6 each strain gauge load cells
  • Maximum Resolution: 1,000 divisions
  • Input Resistance:  750 ohms
  • Output Resistance:  750 ohms
  • Accuracy:  The greater of +/-0.3% of applied load or 1 division
  • Platform Size:  24.5 in L x 14 in W (62 cm L x 36 cm W) weighing surface
  • Overall Size:  28.5 in L x 17.5 in W x 1.7 in H (72 cm L x 45 cm W x 4 cm H) including carrying handles
  • Ramps:  Interlocking, slip-resistant rubber ramps measure 28.5 in L x 10 in W (72 cm L x 25 cm W) each
  • Deck Construction:  Aluminum
  • Single Axle Pad Weight:  57 lb (26 kg) per platform
  • Shipping Weight:  CWL-40 - 263 lb (119 kg)
  • Shipping Weight:  CWL-40KIT - 280 lb (127 kg)
  • Cable Length:  Wheel Pad to Wheel Pad - 63 inches / 160 cm
  • Cable Length:  Wheel Pad to Indicator - 50 feet / 15 m
PRODUCT OPTIONS
ModelSizeCapacityType
CWL-4028" x 27.5"20 TonAluminum
CWL-40KIT28" x 27.5"20 Tonw/ 190A Indicator & Printer
Cardinal EPR - Concrete Deck
   

As the name implies, Cardinal’s ARMOR® concrete deck truck scales provide you with superior-strength, long-life steel construction for optimum vehicle weighing. The ARMOR’s durable baked-on, anti-corrosion tan powder paint stands the test of time. The NTEP legal-for-trade Armor®  includes DB75000-lb stainless steel load cells standard, which are factory assembled. A wide selection of Armor® capacities, platform sizes, and types are available. Each Armor® scale bridge features interconnecting load blocks and receivers for an efficient, no-bolt installation. Rodent protection is standard throughout the scale via conduit integral throughout each scale module. Every Armor® truck scale is 100% assembled and tested before shipping.

  • Scale Width:  11, 12 and 14 ft standard
  • Concentrated Load Capacity:  45 tons
  • Measurement Canada:  AM-4890
  • NTEP:  97-093
  • Paint:  Baked-on epoxyde cross-linked polyester anti-corrosion tan powder paint
  • Load Cell:   DB-75000S
  • Load Cell Construction:  Stainless Steel
PRODUCT OPTIONS
ModelSizeCapacityType
45(12,20,25)-EPR-C12,20, or 25' x 11'45 TonConcrete Deck
5030-EPR-C30' x 11'50 TonConcrete Deck
70(40,47)-EPR-C40' or 47' x 11'70 TonConcrete Deck
8050-EPR-C50' x 11'80 TonConcrete Deck
11060-EPR-C60' x 11'110 TonConcrete Deck
135(70,75,80,90)-EPR-C70,75,80, or 90' x 11135 TonConcrete Deck
135(100,110,117,120)-EPR-C100,110,117, or 120' x 11'135 TonConcrete Deck
11060-EPR-12-C60' x 12' 110 TonConcrete Deck
135(70,80,90)-EPR12-C70,80, or 90' x 12'135 TonConcrete Deck
8050-EPR14-C50' x 14'80 TonConcrete Deck
11060-EPR14-C60' x 14'110 TonConcrete Deck
135(70,80,90)-EPR14-C70,80, or 90' x 14'135 TonConcrete Deck
Cardinal Armor Digital Truck Scale - Steel Deck
   

Cardinal Scale’s steel deck ARMOR® series truck scales with digital SmartCell® load cells offer unmatched performance built to last a lifetime of heavy-duty weighing use. Every facet of the digital truck scale weighbridge and electronics have been specifically built for long-lasting endurance, minimal upkeep, and IoT monitoring convenience. ARMOR® truck scales feature 135-ton capacity, 50-ton CLC, no moving parts below the scale deck including the load cells, more structural steel than the competition, SmartCell® stainless steel waterproof digital load cells, baked-on tan powder coat paint, and IoT-enabled iSite remote monitoring software.

  • Concentrated Load Capacity (CLC): 50 tons
  • Overall Capacities: From 50 tons up to 135 tons standard
  • Platform Sizes: From 12 ft to 160 ft long standard and 10 ft to 14 ft wide standard
  • Load Cell: Digital SmartCell model SCBD stainless steel waterproof load cell
  • Load Cell Cables: Metal braided and run in continuous galvanized steel conduit
  • Load Cell Type: Digital double-ended shear beam strain gauge design with 75,000 pound capacity
  • Overall Scale Height: 17.5 inch high (custom scales available as low as 13.5 inch high)
  • Clearance Height From Top of Pier to Lowest Part of Load Cell: 8 inch
  • Paint: Baked-on, heavy-duty polyester anti-corrosion tan powder paint
  • Steel Deck Thickness: 5/16 inch thick checkered deck (3/8 inch is optional)
  • Load Cell Stands: axis® frictionless centering system fabricated from one-inch-thick steel to minimize rust and corrosion damage
  • Indicator: Navigator model 225D digital weight indicator
  • NTEP Approval: 17-047
  • Measurement Canada Approval: AM-4890
  • Distance from Top of Pier to Lowest Part of Weighbridge: 5 inch
  • Network Connections: Direct Ethernet (standard), Wi-Fi (optional), or cellular modem (optional)
  • IoT Remote Monitoring Software: Cloud-based iSite remote monitoring with e-mail and/or text alerts
  • Load Cell Exclusive Protection: All SmartCells are completely encapsulated and filled with a proprietary potting compound to fill all internal voids and prevent any potential for moisture entering the load cell
  • Internal Structural Integrity: 7.5-inch apart tight concentration of I-beam spacing which additional completely surrounds the load cell pockets
  • Warranty: Standard 5-year bridge-and-below warranty
  • Country of Origin: USA
  • Optional Guide Rails: Optional 4-inch-diameter, bolt-on pipe guide rails 8.5-inch above the deck surface


PRODUCT OPTIONS
ModelSizeCapacityType
1010200, 219, 238, 25712' L x 10', 11' , 12' or 14' W50 TonSteel Deck
1010201, 220, 239, 25820' L X 10', 11', 12', or 14' W50 TonSteel Deck
1010202, 221, 240, 25925' L X 10', 11', 12', or 14' W50 TonSteel Deck
1010203, 222, 241, 26030' L X 10', 11', 12', or 14' W70 TonSteel Deck
1010204, 223, 242, 26140' L X 10', 11', 12', or 14' W70 TonSteel Deck
1010205, 224, 243, 26247' L X 10', 11', 12', or 14' W70 TonSteel Deck
1010206, 225, 244, 26350' L X 10', 11', 12', or 14' W80 TonSteel Deck
1010207, 226, 245, 26460' L X 10', 11', 12', or 14' W110 TonSteel Deck
1010208, 227, 246, 26570' L X 10', 11', 12', or 14' W135 TonSteel Deck
1010209, 228, 247, 26675' L X 10', 11', 12', or 14' W135 TonSteel Deck
1010210, 229, 248, 26780' L X 10', 11', 12', or 14' W135 TonSteel Deck
1010211, 230, 249, 26890'L X 10', 11', 12', or 14' W135 TonSteel Deck
1010212, 231, 250, 269100' L X 10', 11', 12', or 14' W135 TonSteel Deck
1010213, 232, 251, 270110' L X 10', 11', 12', or 14' W135 TonSteel Deck
1010214, 233, 252, 271117' L X 10', 11', 12', or 14' W135 TonSteel Deck
1010215, 234, 253, 272120' L X 10', 11', 12', or 14' W135 TonSteel Deck
1010216, 235, 254, 273125' L X 10', 11', 12', or 14' W135 TonSteel Deck
101017, 236, 255, 274140' L X 10', 11', 12', or 14' W135 TonSteel Deck
1010218, 237, 256, 275160' L X 10', 11', 12', or 14' W135 TonSteel Deck
Cardinal Guardian Hydraulic - Concrete Deck
   

Cardinal’s American-made Guardian Hydraulic Truck Scales are ideal for the solid waste, aggregate, chemical, grain, and construction industries because they offer a high level of protection against many of the conditions that can adversely affect truck scale installations. Water, lightning, power surges, explosive areas, corrosion, welding, shock loading, extreme temperature fluctuations and even rodents can cause scale problems, all at a cost to the owner. NTEP legal-for-trades.

 
  • Concentrated Load Capacity:  40 tons
  • Load Cell:  SST Hydraulic
  • V-min:  3.8, 5.7 lb
  • Accuracy:  Class IIIL 10,000 divisions multiple cells
  • Rated Capacity: 3,000 PSIG
  • Working Capacity:  1,800 PSIG
  • Pressure Transducer Construction:   aluminum
  • Output: 1 mV/V
  • Output Resistance: 350 ohms +/- 1 ohm
  • Load Cell Construction:  Stainless Steel
  • NTEP Approval: 97-093
  • Paint:  Baked-on epoxyde cross-linked polyester anti-corrosion tan powder paint
   
PRODUCT OPTIONS >>
Model Size Capacity Type
H4020-EPR-C 20' x 11' 40 Ton Concrete
H7040-EPR-C 40' x 11' 70 Ton Concrete
H7047-EPR-C 47' x 11' 70 Ton Concrete
H8050-EPR-C 50' x 11' 80 Ton Concrete
H11060-EPR-C 60' x 11' 110 Ton Concrete
H13570-EPR-C 70' x 11' 135 Ton Concrete
H13575-EPR-C 75' x 11' 135 Ton Concrete
H13580-EPR-C 80' x 11' 135 Ton Concrete
H13590-EPR-C 90' x 11' 135 Ton Concrete
H135100-EPR-C 100' x 11' 135 Ton Concrete
H135117-EPR-C 117' x 11' 135 Ton Concrete
Cardinal EWM Containerized Truck Scales
   

FOR NON-NORTH AMERICAN INSTALLATIONS ONLY
Cardinal’s EWM Series Containerized Vehicle Scales’ split-deck construction allows these heavy-duty scales to be loaded into open-top cargo containers, bringing Cardinal’s renowned USA-made truck scale manufacturing quality to anywhere in the world. Sections bolt together upon arrival and feature a solid steel deck platform for optimum strength. Machined precision is evident throughout the scale and ready to hold up to the heaviest of loads. Cardinal includes conduit integral throughout each scale module for complete protection on all electronic load cell cables from rodents and other damage that could occur. Select from 30 and 45 ton concentrated load capacities and OIML-approved SCA compression or DB double-ended shear beam stainless steel load cells, also manufactured by Cardinal for single source convenience.

  • Deck Thickness: 6.4 mm or 9.5 mm
  • Scale Width:  3.35 meters
  • Concentrated Load Capacity:  30 or 45 tons
  • Cargo Container Size:  Fits in either 1 or 2 40-ft cargo containers with open top
  • Load Cells:  Choice of either Cardinal model DB double-ended shear beam or SCA compression stainless steel load cells (OIML approved)
  • Paint:  Baked-on epoxyde cross-linked polyester anti-corrosion tan powder paint


PRODUCT OPTIONS
ModelSizeCapacityType
3012-EWM12' x 11'30 TonSteel Deck
3020-EWM20' x 11'30 TonSteel Deck
6040-EWM40' x 11' 60 TonSteel Deck
6050-EWM50' x 11'60 TonSteel Deck
10060-EWM60' x 11'100 TonSteel Deck
10070-EWM70' x 11'100 TonSteel Deck
10080-EWM80' x 11'100 TonSteel Deck
10090-EWM90' x 11'100 TonSteel Deck
100100-EWM100' x 11' 100 TonSteel Deck
100110-EWM110' x 11'100 TonSteel Deck
100120-EWM120' x 11'100 TonSteel Deck
4512-EWM12' x 11'45 TonSteel Deck
4520-EWM20' x 11'45 TonSteel Deck
7040-EWM40' x 11'70 TonSteel Deck
11060-EWM60' x 11' 110 TonSteel Deck
13570-EWM70' x 11'135 TonSteel Deck
Cardinal EPR-LF Portable Truck Scale
   

Cardinal Scale’s USA-made EPR-LF portable truck scales offer wireless connectivity standard between the scale modules and weight indicator for rapid set-up without rewiring every time the scale is moved. The EPR-LF series comes in 11 standard models to choose from and features a self-contained lower-frame design for portability, 16-inch-overall-height low-profile design, USA-made stainless steel load cells, standard capacities up to 135 tons and 110 ft. long, heavy-duty checkered steel deck, and durable baked-on anti-corrosion powder paint. EPR-LF portable vehicle scales are the ideal answer when a scale is needed that can be moved from site to site. Optional steel ramps, guide rails, indicators, remote displays, and lifting kits are available. NTEP and Measurement Canada certified.

  • Scale Width:  11 ft
  • Concentrated Load Capacity:  45 tons
  • Load Cell:  DB-75000S
  • NTEP Approval:  97-093
  • Paint:  Baked-on epoxyde cross-linked polyester anti-corrosion tan powder paint


PRODUCT OPTIONS
ModelSizeCapacityType
4520-EPR-LF20' x 11'45 TonSteel Deck
7040-EPR-LF40' x 11'70 TonSteel Deck
7047-EPR-LF47' x 11' 70 TonSteel Deck
8050-EPR-LF50' x 11'80 TonSteel Deck
11060-EPR-LF60' x 11'110 TonSteel Deck
13570-EPR-LF70' x 11'135 TonSteel Deck
13575-EPR-LF75' x 11'135 TonSteel Deck
13580-EPR-LF80' x 11'135 TonSteel Deck
13590-EPR-LF90' x 11'135 TonSteel Deck
135100-EPR-LF100' x 11'135 TonSteel Deck
135110-EPR-LF110' x 11'135 TonSteel Deck
Cardinal Guardian Hydraulic - Concrete Pit Type
   

Cardinal’s American-made Guardian Hydraulic Truck Scales are ideal for the solid waste, aggregate, chemical, grain, and construction industries because they offer a high level of protection against many of the conditions that can adversely affect truck scale installations. Water, lightning, power surges, explosive areas, corrosion, welding, shock loading, extreme temperature fluctuations and even rodents can cause scale problems, all at a cost to the owner. NTEP legal-for-trade.

  • Concentrated Load Capacity:  30 and 45 tons
  • Scale Width:  10 ft
  • Load Cell:  SST Hydraulic
  • V-min:  3.8, 5.7 lb
  • Accuracy:  Class IIIL 10,000 divisions multiple cells
  • Rated Capacity:  3,000 PSIG
  • Working Capacity:  1,800 PSIG
  • Pressure Transducer Construction:  aluminum
  • Output:  1 mV/V
  • Output Resistance: 350 ohms +/- 1 ohm
  • Load Cell Construction:  Stainless Steel
  • NTEP Approval:  97-093


PRODUCT OPTIONS
ModelSizeCapacityType
H3010ASRCA-110' x 10'30 TonConcrete Deck
H3012ASRCA-112' x 10'30 TonConcrete Deck
H3024SRC-124' x 10'30 TonConcrete Deck
H5034SRC-134' x 10'50 TonConcrete Deck
H5040SRC-140' x 10'50 TonConcrete Deck
H6050SRC-150' x 10'60 TonConcrete Deck
H10060SRC-160' x 10' 100 TonConcrete Deck
H10070SRC-170' x 10' 100 TonConcrete Deck
H10080SRC-180' x 10' 100 TonConcrete Deck
H100100SRC-1100' x 10' 100 TonConcrete Deck
H12060SRC-160' x 10'120 TonConcrete Deck
H12070SRC-170' x 10'120 TonConcrete Deck
H12080SRC-180' x 10' 120 TonConcrete Deck
H120100SRC-1100' x 10' 120 TonConcrete Deck
Cardinal Harvester Precast Concrete Truck Scale
   

The Harvester series precast concrete scales offer an economical approach to truck weighing for farms. The Harvester is a fully-electronic truck scale featuring factory poured concrete decks for above-ground, low-profile weighing. Incorporating the latest in patent-pending concrete composition with high tensile strength and optimal deck weight, the Harvester is designed for farms with 3,000 acres or less. Cardinal offers single-source convenience and quality construction utilizing USA-made stainless steel model CBC compression load cells. Designed for light-duty agricultural weighing, the NTEP certified Harvester series of vehicle scales are the farmers’ choice for all types of vehicle weighing from planting to harvest.

  • Width: 10 ft.
  • Length:  Ranging from 17.5 ft to 105 ft.
  • Overall Capacity:  Ranging from 25 tons to 50 tons
  • Concentrated Load Capacity (CLC):   25 tons
  • Deck Thickness:  7.25 inches
  • Under-Weighbridge Clearance:  7.5 inches
  • NTEP COC: 12-063
  • Load Cells:  Cardinal model CBC stainless steel compression
 
PRODUCT OPTIONS >>
Model Size Capacity Type
2517-PSC 17' x 6" x 10' 25 Ton Precast Concrete Deck
3535-PSC 35' x  6" x 10' 35 Ton Precast Concrete Deck
4552-PSC 52' x 6" x 10' 45 Ton Precast Concrete Deck
5070-PSC 70' x 6" x 10' 50 Ton Precast Concrete Deck
5087-PSC 87' x 6" x 10' 50 Ton Precast Concrete Deck
50105-PSC 105' x 6" x 10' 50 Ton Precast Concrete Deck
Scales
Cardinal EPR - Concrete Deck
   Engineer\'s Spec Sheet (13570-EPR... Read More
Cardinal Guardian Hydraulic - Concrete Deck
REQUEST MORE INFO    COMMERCIAL CREDIT APPLICATION ... Read More